RC4WD 1/10 High Performance SMD LED Light Bar (100mm/4″)
This is a all new High Performance Lightbar for any RC.
Will make any project look better and add much needed lighting.
Cast Molded Housing
Reversible “L” brackets to fit many applications
Adjustable “L” brackets for rotating light
20 Individual LED bulbs
Super Bright Lighting
Vented on side to dissipate heat
Works with up to 11.1v lipo with use of a BEC to regulate voltage below 7.4 volts
Standard Receiver Plug
Connects to extra channel on receiver
2mm Mounting Holes
Overall Length: 4.81in / 122.3mm
Light Bar Width: 3.93in / 100mm
Overall Height: 0.81in / 20.8mm
Light Bar Height: 0.63in / 16mm
Weight: 1.44oz / 41g
Detail like no other lights out there. We leave our competition in the dark.
1x RC4WD 1/10 High Performance SMD LED Light Bar (100mm/4″)
14x M1.5 x 5mm SHCS (Silver)
6x M1.6 x 6mm Phillips Button Head (Silver) (Z-S1387)
RC4WD Light Bar Knurled Nuts (Z-S1484)
Y harness with Tamiya Connectors for Lightbars (Z-S1601)
RC4WD Mini ON/OFF Switch For Lighting Unit (Z-E0081)
RC4WD Strobe Lighting Unit (Z-S1573)
Use medium grade threadlock on “L”bracket nut to prevent loss and to keep the light in position.
Mounting hardware can be found here. M2 SHCS / M2 BHSC
Recommended use of a BEC when installing this item to your vehicle. This will allow full power to your Light Bar.