RC4WD KC HiLiTES 1/10 C Series High Performance LED Light Bar (150mm/6″)
This is the all new Licensed KC HiLiTES Light bar.
These have been Officially Licensed by the KC HiLiTES Company and are only available from RC4WD and our Dealers.
Will make any project look better and add much needed lighting.
Cast Molded Housing
Reversible “L” Brackets to fit many Applications
Adjustable “L” Brackets for Rotating Light
64 Individual LED Bulbs
Super Bright Lighting
Vented on side to Dissipate Heat
Works with up to 11.1v Lipo with use of a BEC to Regulate Voltage below 7.4 Volts
Standard Receiver Plug
Connects to Extra Channel on Receiver
2mm Mounting Holes
Overall Length: 6.7in / 170.5mm
Light Bar Width: 5.9in / 150mm
Overall Height: 0.82in / 21mm
Light Bar Height: 0.63in / 16.2mm
Weight: 2.43oz / 69g
1x RC4WD KC HiLiTES 1/10 C Series High Performance LED Light Bar (150mm/6″)
1x KC HiLiTES Decal Sheet
20x M1.5 X 5mm SHCS (Silver)
6x M1.6 X 6mm Phillips Head Machine Screws (Silver) (Z-S1387)
RC4WD Light Bar Knurled Nuts (Z-S1484)
Y harness with Tamiya Connectors for Lightbars (Z-S1601)
RC4WD Mini ON/OFF Switch For Lighting Unit (Z-E0081)
RC4WD Strobe Lighting Unit (Z-S1573)
Use medium grade threadlock on “L”bracket nut to prevent loss and to keep the light in position.
Mounting hardware can be found here. M2 SHCS / M2 BHSC
Recommended use of a BEC when installing this item to your vehicle. This will allow full power to your Light Bar.
This product has been tested and approved by the Recon G6. It is Recon G6 Certified.
KC HiLiTES and the KC HiLiTES name are registered trademarks of KC HiLiTES Company.
The KC and KC HiLiTES logo is property of KC HiLiTES Company.