Descrição
Tekin FX-R Rock Crawler System ESC w/ T30 Pro 540 Brushed Motor #TT2100
FX-R Rock Crawler System ESC Description:
Tekin’s FX-R reversing speed controller leads the industry in pure, rock crawling performance. We packed in advanced features tailor-made for rock crawlers like; High Resolution Dray Brake for Lock-Down hold on steep inclines, Instant Reverse (or Reverse Delay), and Ultra Low-Speed Creep with precision throttle and brake response. QuickTune On-Board Programming gives you simple and convenient tuning with thousands of possible settings at your fingertips. Extensive ESC tuning and updating is available when used with Tekin’s HotWire PX interface. The FX-R can also take on your power needs with 3S Li-Po compatibility when used with 35 turn can also take on your power needs with 3S Li-Po compatibility when used with 35 turn or higher motors. Install the FX-R and step up to smarter, smaller, faster electronics.
FX-R Rock Crawler System ESC Feature:
Easily Access Programming, Anywhere, Anytime
On-Board Temperature Indicator
PC Interface for Custom Programming
HDAC: High Density Copper Fet Boards
Enhanced Drag Brake Resolution
Ultra-smooth Low Speed Response
Solder Posts For Easy Wire Replacement
Self Test Diagnostics and Factory Reset
Pit Tune Mode
DGF2: Digital Glitch Filtering V2
QuickTune™ One-Touch Programming
One-Touch Radio Calibration
FX-R Rock Crawler System ESC Program Features:
Drag Brake (11 steps)
Reverse Strength (11 steps)
Throttle Profiles (6 choices)
Current Limiter (none, 10 steps)
Push Control-Anti Drag (11 steps)
Reverse Type (3 choices; none, delay, immediate)
Voltage Cutoffs (none, 2S, 3S, custom)*user selectable with Tekin HotWire PC connection
Neutral Width (11 steps)
Additional Tuning with Tekin HotWire (HotWire sold seperately)
FX-R Rock Crawler System ESC Specification:
Controls: Forward/Brake/Reverse
ON Resistance: 0.0012 Ohms
Input Voltage: 4-9 Cells, 2S LiPo (3S Lipo with 35T or higher motor)
BEC: 6.0v/3.0A **Separate BEC unit recommended for use with 3S lipo and high torque servos**
Motor Limit: 13T Turn (35 Turn with 3S Lipo)
Throttle Profiles: 6 choices on board
Reverse Type: 3 choices on board- None / Immediate / Delay
Reverse Strength: 11 steps on board
Drag Brake: 11 steps on board
Dimensions: 1.1 x 0.80 x 0.40″(28 x 20 x 10mm)
Weight: 0.63oz / 18g
T30 Pro 540 Brushed Motor Description:
Tekin’s brushed rock crawler motors are ready for rock-pounding punishment. Brushed motors are the choice of top level rock crawling competitors and the Tekin T-Series was designed for use by the most demanding drivers. Choose from the standard machine wounds models or the handwound and pro-tuned models for competition level performance. Radio control rock crawlers crave maximum torque, smooth throttle response and strong holding power –Tekin’s T-Series rock crawler motors are up to the task.
T30 Pro 540 Brushed Motor Feature:
For: Rock Crawler
Brushed Motor Design
Dual precision Ball Bearings
Hand Wound Armature Pro model
High Torque Specification
Completely Rebuildable
Legal in Rock Crawling Competitions
T30 Pro 540 Brushed Motor Specification:
Input Voltage: 2S-4S LiPo / 4-12S NiMH-NiCD
Weight: 171g / 6.03oz
Shaft Dimensions: 3.2mm (1/8″) x 11.3mm
Motor Diameter: 35.8mm / 1.41″
Motor Length: 52.5mm / 2.10″
Magnet Material: FB12 Ferrite (HD) / FB9 Ferrite (Pro)
Rebuildable: Yes
Combo Include:
Tekin FX-R Rock Crawler System ESC #TT1091
T30 Pro 540 Brushed Motor #TT2124
Avaliações
Ainda não existem avaliações.