Vaterra 1972 Ford Bronco 4×4 Ascender 1:10 RTR

471.90 429.00



Em stock

REF: VTR03031I Categorias: ,


Vaterra 1972 Ford Bronco 4×4 Ascender 1:10 RTR



The brainchild of the same visionaries behind the Mustang, the first generation Bronco featured a unique chassis engineered to drive boldly where the pavement ends. You’ll find that same spirit of off–road adventure in this licensed, 1/10–scale recreation of the ’72 Bronco. Its proven Ascender™ chassis features stamped–steel ladder frames, over 45° of steering travel and one of the most capable off–road suspensions available.

Heavy Duty Suspension
The chassis rides on a 3–link panhard bar front suspension and a 4–link rear suspension. All suspension links are machined from aluminium to handle the most punishing conditions. Oil–filled, threaded shocks soak up the bumps and give you a variety of pre–load settings.

Metal Gear Transmission
The single–speed, metal gear transmission is engineered for steep inclines and rugged, rocky terrain. Those seeking a broader range of speed and climb performance can upgrade to the optional two–speed transmission, sold separately.

Floating Battery Tray
The battery tray floats over the front axle and is designed to accept 96mm shorty packs. Placing the weight of the battery over the front axle gives the front tyres extra traction when crawling over rocks and tackling steep inclines.

Crawler Style Front Bumper
Front bumper features moulded tow hooks. An opening on the front bumper leaves plenty of room for a winch cable. If you want to try different 1/10–scale bodies later on, the bumper can be moved to accommodate most of them.

Heavy Duty CV Front Shafts
As with the rest of the drivetrain components, these have been designed to handle rugged terrain. They also allow up to 45 degrees of steering angle – more than most other trucks in this class.

Licensed 1972 Ford® Bronco Body
The painted, polycarbonate body is modelled after one of the most popular early editions of the Ford Bronco ever built. Scale touches include an injection–moulded grille with headlight details and authentic Ford badging.

Sticky Compound Interco Super Swamper Tyres
The realistic drivetrain and suspension are complemented by licensed replicas of Interco TSL SX Super Swamper™ tyres. Like the full–scale versions, their tread pattern and compound provide excellent grip at almost any angle.

Powerful Dynamite® Crawler Motor
The potent Dynamite motor delivers all the torque you need to muscle over rock piles and power through mud and brush.

Waterproof Electronics
The truck is equipped with a waterproof receiver, speed control and steering servo for driving in the real world, where things get wet and the weather is often less than perfect.

Spektrum™ DX2E 2.4GHz Radio System
The included radio system gives you the unbeatable signal security and responsiveness of Spektrum DSMR® 2.4GHz technology. The DX2E transmitter is compatible with any Spektrum surface receiver so you can use it with other RC vehicles as well.


  • Ascender™ Stamped-Steel Ladder-Frame Chassis
  • Licensed 1972 Ford Bronco Body
  • Crawler Style Front Bumper
  • 3-Link Panhard Bar Front Suspension
  • 4-Link Rear Suspension
  • Aluminium Suspension Links
  • Floating Battery Tray
  • Realistic Axle Housings
  • One-Piece, Low-Profile Locker/Ring Gear
  • Heavy Duty CV Front Shafts
  • Single-Speed, Metal Gear Transmission
  • Oil-Filled, Threaded Shocks
  • Spektrum DX2E 2.4GHz radio system with batteries


  • Electric Motor Size:35T 540 Size
  • Fuel Type:Electric
  • Height:229mm (9 inch)
  • Kit / Ready-Built:Ready-To-Run
  • Length:445mm (17.5 inch)
  • Number of Channels:Spektrum™ DX2E 2 Channel (included)
  • Scale:1/10
  • Weight:1.8kg (4 lbs)
  • Wheelbase:278mm (10.95 inch)
  • Width:229mm (9 inch)

In the box:
Inside the box is a Spektrum DX2E steer wheel radio that is not only ergonomically designed to be comfortable to use but also gives excellent control and interference free running. To power the radio is four AA batteries that are sure to keep you going for many battery packs to come. The car is 100% assembled and includes a pre-installed Dynamite 35T crawler motor and waterproof ESC . All that is needed to get the Ascender going is a 2S or 3S LiPo with EC3 connectors of your choosing (depending on how fast you want to go) and a suitable charger.

Manufacturer: Vaterra
Part Number: VTR03031I
Motor Type: Brushed
Drive: 4WD
Surface Type: Off-Road
Assembly Type: Assembled (RTR)
Scale: 1:10
Vehicle: Rock Crawler



Não existem opiniões ainda.

Seja o primeiro a avaliar “Vaterra 1972 Ford Bronco 4×4 Ascender 1:10 RTR”

O seu endereço de email não será publicado. Campos obrigatórios marcados com *